How To Use; Technical Data - UNITED OFFICE 66068 Operation And Safety Notes

Comb Binding Machine
Safety precautions
This machine has been developed for punching
paper and plastic sheets and for binding these
materials with plastic binding combs. It must be
used solely for this purpose and inaccordance
with these operating instructions.
Always make a test with scrap paper before
punching the original document.
Empty the waste container regularly.
Do not attempt to exceed the maximum punching
quantity of 12 sheets.
©

Technical data

Operation:
Punch system:
Paper sizes:
Max. hole capacity:
Max. binding capacity: 350 sheets
Net weight:
Dimensions:
©
Description
A Punching and binding lever
B Paperguide for paperformat when punching
C Punching slot
D Binding mechanism for comb opening and closing
E Measuring gauge for determining comb size
F Waste container
G Slot for ring binder hole punching
©

How to use

1. Setting up the machine
Place the machine on a stable surface.
2. Punching and binding
Lay the paper on the adjustable paperguide B.
Punching Test the punching result with a piece
of scrap paper before you punch the original
document.
manual
21 / 4 holes
up to A4
12 sheets (80 g / m²)
3.7 kg
390 x 260 x 160 mm
Tap the paper stack on a flat surface and place
it in the punching slot C with the pages aligned
to the left side.
Press the hole punch lever A down forwards in
order to punch holes into the paper.
3. Binding
Determining the binding comb size with measuring
gauge E.
Place the plastic binding comb in the binding
mechanism D with the side to be opened
uppermost.
Press the binding lever A far enough so that the
binding comb is opened wide enough for the
paper to be comfortably laid over it.
Place the punched paper stack onto the opened
binding comb. Start with the front cover. To close
the binding comb, push the binding lever A back
to its starting position.
Remove the bound document.
Insert the paper / film here to provide it with
4 ring binder holes.
4. Emptying the waste container
The waste container F is situated on the under-
side of the machine. Release the cover of the
waste container over a waste paper bin and
empty it. Close the waste container again.
©
Guarantee and service
3T Supplies AG, Peach Division
Chaltenbodenstr. 6
CH-8834 Schindellegi
Tel.: 00800 55 77 88 11
E-Mail: support@peach.info
Homepage: www.3ppp3.com
©
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
GB/CY 5
GB/CY 4