Advertisement
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other
countries. All other trademarks mentioned in this document or Website are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (0705R)
© 2009 Cisco Systems, Inc. All rights reserved.
78-18988-01
4
Connecting Network Devices
The following application diagram is an example of a typical network
configuration.
1
2
3
4
5
6
7
8
9
10
11
12
Cisco Small Business
SR2024
Link/Act
1
2
3
4
5
6
7
8
9
10
11 12 / miniGBIC1
Gigabit
(Shared with 12)
(Shared with 24)
Link/Act
SYSTEM
13
14
15
16
17
18
19
20
21
22
23 24 / miniGBIC2
Gigabit
24-Port
13
14
15
16
17
18
19
20
21
22
23
24
miniGBIC1
miniGBIC2
10/ 100/ 1000 Swit ch
When you connect your network devices, make sure you do not exceed the
maximum cabling distance of 328 feet (100 meters).
Follow these steps to connect network devices to the switch:
S
1
Turn off all of the devices you want to connect to the switch.
TEP
S
TEP
2
Connect one end of a Category 5 Ethernet network cable to one of the
numbered ports on the switch. Connect the other end of the cable to a
computer or other network device.
S
3
Repeat Step 2 to connect additional devices.
TEP
S
4
If you are using a miniGBIC port, connect a miniGBIC module to the
TEP
miniGBIC port. The miniGBIC ports are shared.
•
Do not use port 12 if you are using the miniGBIC1 port.
•
Do not use port 24 if you are using the miniGBIC2 port.
For detailed instructions, refer to documentation for the module.
N
The miniGBIC ports are only compatible with the Cisco
OTE
miniGBIC models MGBSX1, MGBLH1, MGBT1, MGBLX1, and
MGBBX1.
S
5
Connect the supplied power cord to the power port on the switch and
TEP
plug the other end into an electrical outlet.
N
When connecting power, always use a surge protector.
OTE
S
TEP
6
Power on the devices connected to the switch. The corresponding
LED for each active port will light up on the switch.
Congratulations! The installation of the SR2024 switch is complete.
5
Product Specifications
Feature
Description
Model
SR2024
Ports
24 RJ-45 10/100/1000 ports, two miniGBIC ports
Standards
IEEE 802.3, 802.3u, 802.3x, 802.3ab
Cabling Type
Category 5 or better
LEDs
System, Link/Act 1-24, Gigabit 1-24
Security
Security slot
Feature
W x H x D
Dimensions
17.01 in. x 1.75 in. x 13.74 in.
(432 mm x 44.5 mm x 349 mm)
7.98 lb (3.621 kg)
Unit Weight
100-127VAC/200-240VAC, 1.0A/0.5A, 50-60 Hz
Power
FCC Class A, CE
Certification
32 to 104ºF (0 to 40ºC)
Operating
Temperature
Storage
-4 to 158ºF (-20 to 70ºC)
Temperature
Operating
10% to 90%, noncondensing
Humidity
Storage
10% to 95%, noncondensing
Humidity
6
Where to Go from Here
Resource
Location
Technical
http://www.cisco.com/en/US/products/ps10007/
Documentation
tsd_products_support_series_home.html
Customer Support
www.cisco.com/en/US/support/
tsd_cisco_small_business_support_center_contacts.
html
Open Source License
www.cisco.com/go/osln
Notices
Regulatory
www.cisco.com/en/US/products/ps10007/
Compliance and
tsd_products_support_series_home.html
Safety Information
Warranty Information
www.cisco.com/go/warranty
Cisco Partner Central
www.cisco.com/web/partners/sell/smb
site for Small Business
Advertisement
