Change Supervisor/User Password - Global American 3304120 User Manual

3304120 User's Manual

4.11 Change Supervisor/User Password

AMIBIOS HIFLEX SETUP UTILITY
(C)2001 American Megatrends, Inc. All Rights Reserved
ESC: Exit
You can set either supervisor or user password, or both of them. The
differences are:
z supervisor password: can enter and change the options of the setup
menus.
z user password: just can only enter but do not have the right to change the
options of the setup menus.
When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
Type the password, up to eight characters in length, and press
<Enter>. The password typed now will clear any previously entered
password from CMOS memory.
password. Type the password again and press <Enter>. You may
also press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to
enter the password.
disabled. Once the password is disabled, the system will boot and you
can enter Setup freely.
Standard CMOS Setup
Advanced CMOS
Advanced Chipset
Power Management Setup
Enter new supervisor password: _
Change Supervisor Password
Auto Configuration with Optimal Settings
Auto Configuration with Fail Safe Settings
Save Settings and Exit
Exit Without Saving
Change the Supervisor Password
F2/F3: Color
ÇÈ:Sel
ENTER PASSWORD:
You will be asked to confirm the
A message will confirm the password will be
VERSION x.xx
Setup
Setup
F10: Save & Exit
35