Operating A Tv - RCA RCU500 User Manual

Operating A TV

Turning the TV On and Off.
1. Press TV to set the remote to control the
TV (Most RCA, GE and ProScan models will
only turn on when TV is pressed,
not POWER.)
2. Press POWER to turn the TV on or off.
Change Channels on the TV
Press CHANNEL UP or CHANNEL DOWN
to change channels on the TV or enter the
channels as you would normally for
your TV.
Use the buttons below to adjust features on
your TV.
DISPLAY – Shows displays on the screen and
clears menus from the screen.
MUTE – Switches the TV sound on or off.
PREV CH (PREVIOUS CHANNEL) – Changes
back and forth between two channels. Select a
channel using the number buttons and then
select another. Press PREV CH to switch
between the two channels.
If your TV has picture-in-picture, you may be
able to use the following buttons to adjust PIP.
PIP (PICTURE-IN-PICTURE) – Turns the small
picture on or off.
PIP MOVE – Moves the small picture to the
next corner.
SWAP – Switches the channel in the small
picture with the big picture.
FREEZE – Freezes or unfreezes the small
picture.
You may want to experiment with the remote to
determine all the buttons which will work with
your TV.
DSPY
MUTE
PIP
SWAP
MOVE PIP
FREEZE
ENTER
PREV CH
5