Recording Blank Spaces Between Selections; Copying A Cassette Tape (Dubbing) - RCA SCT-560 Owner's Manual

Recording Blank Spaces Between
Selections
Some cassette decks search for the blank spaces between
selections so you can quickly locate specific selections. If
the original program does not have blank spaces, you can
add them when you make a new recording.
While the cassette deck is set to record or record pause,
press (•).The deck records 4
REC MUTE
silence and pauses. To begin recording again, press
(8) or the appropriate play button (3 or 2).
PAUSE
• To record a blank space of more than 4
press again after the cassette deck pauses, or press
and hold for the desired length of time. To begin
recording again, press 8, 3, or 2.
• To record a blank space of less than 4
1
press before 4 / seconds pass. To begin recording
2
again, press 8, 3, or 2.

Copying a Cassette Tape (Dubbing)

Notes:
• If the original recording has Dolby B NR or Dolby
C NR, the copy will also have it, regardless of the
position of
DOLBY NR
have Dolby NR, you cannot add it to the tape you
are dubbing.
• does not affect the recording level
REC LEVEL
during dubbing.
• Both decks automatically stops when either tape
reaches the end. We recommend you dub onto a
tape that is the same length as the original, so the
decks stop at the same time.
To copy a cassette tape:
1. Press to turn on the cassette deck.
POWER
2. Load the cassette tape you want to copy into
Deck 1. Be sure the side you want to copy
faces you with the full reel to the left.
3. Load a blank tape (or one you want to record
over) into Deck 2. Be sure the side you want
to record on is facing you and the full reel is
to the left.
4. Set . See "Loading and Playing a
REV MODE
Cassette Tape."
5. Press 3 on Deck 1 to set the tape direction,
then press 7.
6. Press 3 on Deck 2 to set the tape direction,
then press 7.
1
/ seconds of
2
1
/ seconds,
2
1
/ seconds,
2
. If the original does not
7. To begin dubbing, press the appropriate
button:
to dub at normal playback speed.
NORMAL
to dub at twice the normal speed.
HI-SPEED
The cassette in Deck 1 automatically plays.
Both decks automatically stops when either tape reaches
the end.To manually stop dubbing, press 7 on either
deck; this stops both cassette decks.
SPECIAL FEATURES
COPY
11