Table of Contents
Advertisement
DUBBING A CASSETTE TAPE
1. Insert a prerecorded cassette tape into
blank tape for recording into
side.
2. Press
.
DUBBING
The RECORD and DUBBING indicators light, and both
PLAY direction indicators
3. Press
PLAY
or
cassette tape for
DECK 2
The indicators in the selected buttons stop blinking and
the other indicators turn off.
The indicator
of
DECK 1
4. Press the
STOP
button on
Both decks stop.
Note: If the original tape was recorded using Dolby NR, the
copy also has Dolby NR, regardless of the position of the
switch. If the tape you copy does not have Dolby
DOLBY NR
NR, you cannot add it to the tape you record.
Changing a Cassette Tape in DECK 1 During
Dubbing
If you press
on
STOP
DECK 1
and
DECK 2
records 4 seconds of blank tape then goes into the
pause mode. During this time, you can change the cassette tape
RECORD
in
DECK 1
. Press
REC/
PAUSE
of
to resume dubbing.
DECK 1
AUTO DUBBING A CASSETTE TAPE
It is convenient to use this function when dubbing an entire
cassette tape from the beginning.
1. Insert a prerecorded cassette tape into
blank tape for recording into
2. Press
.
AUTO DUB
The cassette tapes of
DECK 1
automatically to the beginning after you press
When rewinding is complete, Auto Dubbing begins.
One side of a cassette tape is recorded from the beginning
to the end automatically regardless of the mode.
8
DECK 1
, and a
to dub a tape on one
DECK 2
/
of
flash.
DECK 2
to select the direction of the
.
lights.
DECK 2
to stop dubbing.
during dubbing,
DECK 1
then press the
PLAY
button
and a
DECK 1
DECK 2
.
and
rewind
DECK 2
AUTO DUB
HI-SPEED DUBBING A CASSETTE TAPE
1. Insert a prerecorded cassette tape into
blank tape for recording into
2. Press
HI-SPEED
3. Press
DUBBING
4. Press
PLAY
cassette tape for
The indicators in the selected buttons stop blinking and
the other indicators turn off.
5. Press
STOP
on
Both decks stop.
stops
.
DECK 1
.
DECK 2
.
.
or
to select the direction of the
.
DECK 2
DECK 2
to stop dubbing.
and a
Hide quick links:
Advertisement
Table of Contents
