Table of Contents
Advertisement
Playback
Playback Using the LCD Monitor or Viewfinder
You can view tapes in color using the LCD monitor or black-and-white using
the viewfinder. You can hear the sound from the tapes on the built-in speaker
when you use the monitor.
BRIGHT
Control
SPEAKER
VOLUME
Control
PUSH/OPEN
Button
LCD
Monitor
To Play Back a Tape
1. Attach a power supply.
Attach the adapter/charger, charged
battery, or optional DC car cord.
2. Insert a tape.
• Press PUSH/OPEN to open the LCD
monitor. Open the monitor at least
60º before opening the cassette
compartment.
• Press EJECT to open the cassette
compartment.
• Turn the tape wheel on the cassette
to remove any slack from the tape.
• Insert the cassette with the tape
wheel facing up and the tape window
facing out.
• Press the PUSH button to lock the
cassette compartment closed.
3. Place the POWER switch in VCR.
The power indicator will light .
4. Use the LCD monitor or viewfinder
to view what you are recording.
68
Eyepiece Focus
Control
EJECT Button
PUSH Button
Use the LCD Monitor
• Make sure the monitor is open at
least 60º. The viewfinder will be
automatically turned off.
• Tilt the LCD monitor (up to 45º up
or down).
• Adjust the brightness of the image
by turning the BRIGHT dial.
• Adjust speaker volume with the
SPEAKER VOLUME control.
Use the Viewfinder
• Make sure the monitor is closed and
locked. The viewfinder will be
automatically turned on.
• Adjust the viewfinder for a
comfortable viewing condition.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder for
your vision.
5. Press PLAY/PAUSE to begin
playback.
• If necessary, adjust tracking.
• During playback, use the playback
features on the next pages.
6. Press STOP when you are finished.
Viewfinder
Advertisement
Table of Contents
