Table of Contents
Advertisement
Recording
6 6
6. Press
to display the Sub Menu.
Tally
ON
Interval Timer
OFF
Rec Time
OFF
JLIP ID NO.
0 7
4 4
3 3
7. Press
or
to highlight Rec Time.
6 6
8. Press
to start Rec Time flashing.
4 4
3 3
9. Press
or
to select the amount of
time you want the camcorder to
record.
• Select 1/4S, 1/2S, 1S, or 5S to have
the camcorder record for 1/4
second, 1/2 second, one second, or
five seconds.
• Select OFF to turn off the
recording time.
3 3
10.Press
to highlight Interval Timer.
6 6
11.Press
to start Interval Timer
flashing.
4 4
3 3
12.Press
or
to select the amount of
time you want between recordings.
• Select 15S, 30S, 1min, or 5min to
set the intervals between recording
to 15 seconds, 30 seconds, one
minute, or five minutes.
• Select OFF to turn off the Interval
Timer.
13.If necessary, adjust the exposure
control, focus, and stabilizer before
step 14.
14.Press MENU to exit the menu.
15S
the amount of recording time, and
1/4S
and the amount of interval time appear
30S
in the viewfinder or on the LCD
1/2S
1min
monitor.
1S
5min
5S
OFF
OFF
15.Press the thumb trigger to start
recording.
Notes: The camcorder will start and stop
recording the selected amount of time.
If the tally light is turned on, it flashes
with the flash speed increasing five
seconds before recording begins.
16.Turn off the interval and recording
time when you are finished by
selecting Interval Timer OFF and Rec
Time OFF in the Sub Menu.
Note: Fades and wipes do not operate during
time-lapse recording.
and
5min
1/4S
PAUSE
59
Advertisement
Table of Contents
