Date And Time Display; Set The Date And Time - RCA Pro884HB User Manual

Date and Time Display

Set the Date and Time

The clock cell must be installed as shown on page 30 before you set the clock.
REW Button
STOP Button
1. Attach a power supply to the
camcorder. Press and hold the small
button on the CAM/OFF/VCR switch
while you slide it in CAM.
2. If the date and time display does not
appear in the viewfinder, press
DATE/TITLE.
3. A flashing cursor lets you know which
part of the display you are setting.
Press the F.F or REW button
repeatedly until the correct month
appears.
12:00AM
1/1/1995
Month
Day
Year
28
CAM/OFF/VCR Switch
PLAY
Button
DATE/TITLE Button
F.F Button
4. Then press STOP. The flashing cursor
5. Repeat steps 3 and 4 until you have
6. After you select AM or PM, press
Correct the Date or Time
To correct the date or time after the clock
Hours
has been started, simultaneously press
Minutes DATE/TITLE and STOP. Then correct
the date or time using REW, F.F,
AM or PM
and STOP.
will move to the next part of the
display.
entered the correct month, day, year,
hour, minute, and AM or PM.
DATE/TITLE to remove the flashing
cursor from the viewfinder and start
the camcorder's internal clock.