Installation Of The Reverse Feed Arm And The Reverse Feed Solenoid; Stop Position Of The Feed Control Spring Rack - JUKI DDL-9000B-SH Engineering Manual

(8) Adjustment of the amount of feeding

8) Installation of the reverse feed arm and the reverse feed solenoid

9) Stop position of the feed control spring rack

Install the feed control spring rack
hole end plane of the bed column B
Standard Adjustment
(40086728) so that a distance of 2.3mm is kept between the oblong
and the end part of the setscrew
A
– 34 –
0.5 to 1.0mm
.
Details in Part A