Ddns - Tenda F3 User Manual

---End
Remote Access
Enter Protocol name://WAN port IP address:External port in the address bar of a web browser on a
computer over the internet to access the resources on the LAN server. In this example, enter
http://102.33.66.88:80.
If you are uncertain about the WAN IP address of the router, you can use the DDNS function to map the WAN
IP address to a domain name, and then you can access the LAN server with the domain name instead of the
WAN IP address.

3.7.3 DDNS

DDNS maps the WAN IP address (public IP address) of the router to a domain name for dynamic domain
name resolution. This ensures proper operation of functions that involve the WAN IP address of the
router, such as the port forwarding function.
To enable the DDNS function, choose Advanced. By default, it is disabled. Select the Enable to enable
this function.
The following table describes the parameters.
Parameter Description
DDNS It specifies whether to enable the DDNS function.
It specifies a DDNS service provider. The supported service providers include
Service Provider
dyndns.com, oray.org and noip.com.
DDNS It specifies the user name registered on a DDNS service provider's website for
41