Cabinet Disassembly Instructions - Philips 32PFL1507/F8 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[3] Digital Main
[2] Rear Cabinet
CBA Unit
[4] Power Supply
CBA
[8] IR Sensor
[5] Stand Bracket
CBA Unit
[7] LCD Module
Assembly
[10] Front
Cabinet
2. Disassembly Method
Step/
Fig.
Loc. Part
No.
No.
Stand
[1] D1 3(S-1)
Assembly
Rear 10(S-2), 3(S-3),
[2] D1
Cabinet 2(S-4), 13(L-1)
4(S-5), CN3005,
Digital Main D2 CN3101, CN3102,
[3]
CBA Unit D3 CN3701, CN3801,
CN3802, Jack Holder
Power 5(S-6), CN200,
D2
[4] Supply CN601, CN1100,
D3
CBA CN1101, CN1102,
Stand
[5] D2 (S-7)
Bracket
4(S-8),
[6] Speaker D2
Speaker Holder
LCD
[7] Module D2 ---------------
Assembly
IR Sensor D2
[8] Sensor Lens
CBA Unit D3
Function D2
[9] Function Knob
CBA Unit D3
[6] Speaker
[9] Function
CBA Unit
Removal Note
---
---
---
---
---
---
---
---
---
4-1
Step/
Fig.
Loc. Part
No.
No.
Front
[10] D2 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Removal Note
---
↓ ↓
(4) (5)
PL11.10-A_DC