Table of Contents
Advertisement
Figure 3. Front panel of the RackSwitch G7028
The front panel of the G7028 contains the following components:
LEDs that display the status of the switch module and the network.
One RJ-45 RS-232 console port that provides an additional means to configure the switch module.
Twenty-four 1000BASE-T Ethernet ports for 10/100/1000 Mbps connections.
Four SFP+ port connectors to attach SFP/SFP+ transceivers for 1 Gb or 10 Gb connections or DAC
cables.
An Ethernet link OK LED and an Ethernet Tx/Rx LED for each Ethernet port on the switch.
Figure 4 shows the rear panel of the RackSwitch G7028.
Figure 4. Rear panel of the RackSwitch G7028
The rear panel of the G7028 contains the following components:
One AC power connector (IEC 320-C14)
Three fans
One DC power connector for power supply redundancy
RackSwitch G7028
9
Advertisement
Table of Contents
