Toro ProCore 648 Service Manual page 29

Fuel Tank Removal (Fig. 5)
1. Park machine on a level surface, fully raise coring
head, engage parking brake, stop engine and remove
key from the ignition switch. Secure coring head with
service latch.
2. Close tank fuel shut–off valve. Disconnect fuel hose
from the fuel filter (Fig. 6).
3. Use shut–off valve to empty fuel tank into a suitable
container.
4. Remove fuel tank using Figure 5 as a guide.
Fuel Tank Installation (Fig. 5)
1. Install fuel tank to frame using Figure 5 as a guide.
Apply anti–seize lubricant to fuel tank cap screws and
torque screws from 30 to 60 in–lb (3.4 to 6.8 N–m).
2. Connect fuel hose to the fuel filter.
3. Fill fuel tank (see Operator's Manual). Open fuel
shut–off valve.
4. Return coring head service latch to stored position
before using machine.
ProCore 648
3
1. Fuel shut–off valve
2. Fuel filter
Page 3 – 9
2
1
Figure 6
3. Fuel hose
Kohler Engine