General Operation - Ryobi RBL1850S Original Instructions Manual

■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
CORDLESS BLOWER SAFETY WARNINGS
■ Some regions have regulations that restrict the use of
the product in some operations. Check with your local
authority for advice
■ Do not allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge, or people unfamiliar with these instructions
to use the product. Local regulations may restrict the
age of the operator.
■ Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
■ Keep bystanders, children and pets 15 m away from
the area of operation. Stop the product if anyone enters
the area.
■ While operating the product, always wear substantial
footwear and long trousers. Do not operate the machine
when barefoot or when wearing open sandals. Avoid
wearing clothing that is loose fitting or that has hanging
cords or ties; they can be caught in moving parts.
■ Do not wear loose clothing or jewellery that can be
drawn into the air inlet.
■ Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
2 | English
■ Wear hearing protection at all times while operating the
product. The product is extremely noisy and permanent
hearing injury may result if instructions to limit exposure,
reduce noise and wear hearing protection are not
strictly followed.
■ Wear full eye protection at all times while operating the
product. The manufacturer strongly suggests a full face
mask or fully enclosed goggles. Normal spectacles or
sunglasses are not adequate protection. Objects can
be thrown at high speed by the powerful air jet at any
time and may rebound from hard surfaces toward the
operator.
■ Before each use, ensure that all controls and safety
devices function correctly. Do not use the tool if the off
switch does not stop the product.
■ Before each use, always inspect the housing for
damage. Ensure that guards and handles are in place
and properly secured.
■ Never operate the product with defective guards or
shields, or without safety devices, such as debris
collector, in place.
■ Keep all cooling air inlets clear of debris.
■ Use rakes and brooms to loosen debris before blowing.
■ Clear the work area before each use. Remove all
objects, such as rocks, broken glass, nails, wire, or
string, which can be blown a considerable distance by
high velocity air, or become entangled in the fan.

GENERAL OPERATION

■ Operate the product only at reasonable hours – not
early in the morning or late at night when people might
be disturbed.
■ Do not operate the product in an explosive atmosphere.
■ Avoid using the product in bad weather conditions,
especially when there is a risk of lightning.
■ Do not operate the product in poor lighting. The
operator requires a clear view of the work area to
identify potential hazards.
■ Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the work area.
■ Do not get distracted, and always concentrate on the
task.
■ Operating similar tools nearby increases both the risk
of hearing injury and the potential for other persons to
enter your work area.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
■ Always be sure of the footing on slopes. Walk, never
run.
■ Keep all parts of your body away from any moving part.
■ Never run the product without the proper equipment
attached.
■ Do not modify the product in any way or use parts
and accessories that are not recommended by the
manufacturer.