Husqvarna Viking Opal 690Q User Manual page 38

SEWING MODE (670/690Q)
™ feature. Touch to change your selection.
buttons on the function panel.
screen.
3. Recommended needle for the selected fabric. An arrow indicates if
needle up/down is selected.
4. Recommended presser foot for the selected stitch.
to adjust the thread tension.
7. The selected stitch, both illustrated and displayed by number.
8. When straight stitch is selected, change the needle position by
9. Recommendation to use stabilizer under your fabric.
10. Indicates that the stitch can be tapered when a Decorative Tapering
11. When you select a satin stitch the length and width settings will be
be shown instead of the length setting.
bartack or darning stitch is selected or when a satin stitch is selected
and the Alt icon is touched. Reduce or increase the stitch density by
16. When sewing buttonholes in stretch fabric we recommend to cord
the buttonhole for better durability, see page 49.
17. When sewing a manual buttonhole, the darning program, automatic
is shown to indicate that you need to press Reverse when the
buttonhole columns, the darning stitch, the automatic tapering stitch
™
5
6
690Q, Normal Sewing Mode, Straight stitch
9
690Q Normal Sewing Mode, Decorative stitch
690Q Manual Buttonhole
690Q Sensor One-Step Buttonhole
7
8