Advertisement
•
Test Limit: Select General Fiber Optic.
•
Reference Method: Select 1 Jumper Reference.
•
No. of Connectors/Splices: These settings are only for test
limits that use a calculated limit for loss. They are not
applicable to the General Fiber Optic limit.
2-4 To save the settings, tap SAVE on the TEST SETUP screen.
A
B
C
To set up a project, tap the PROJECT panel.
To change settings for the test or select a different test, tap
the test setup panel.
To set up cable IDs and turn on Auto Save, tap the Next ID
panel.
To set the reference and verify your test reference cords for
loss/length tests, tap SET REF.
To upload test results to LinkWare Live, tap SYNC.
ke Networks products at:
Figure 2. Panels on the Home Screen
ShopFlukeNetworks
D
E
HGP01.EPS
1.888.6
.com
Advertisement
