Skoda Stream Manual page 7

Tuning and Storing the Stations
Manual tuning
You can set the frequency of a requested
station by pressing button 6
frequency keeps changing when you keep
3 4
button 6 or pressed. Release the button
to stop tuning. The display will show the set
frequency.
Automatic tuning - SEEK
You can skip to the next available station in the
currently selected band by pressing button
7 8
or The tuner will automatically stop
when the next station is found in the desired
direction.
Storing the stations to presets
Use buttons or to tune the station you want
3 4
or . The to store. Press and hold (for approx. 2s)
selected preset button
station. (The sound volume is lowered
temporarily and a beep sounds; then the
station is stored.) You can use 6 x 6 presets.
Recalling the presets
Having stored the stations using the preset
7 buttons 12 , you can press any of the buttons
briefly to recall the respective station.
Automatic tuning and storing of stations
The automatic tuning and storage system seeks
all stations within a selected band, selects 6
stations with the strongest signal, and stores
them as presets. Press
to start the process. The display shows a
message STORING
(see picture).
6 7
12 to memorise the
4 AS (AutoStore) button
and the sound is muted
Operation of the Radio
If you select the FM band,
layer will include 6 stations with the strongest
signal in the FM band. As soon as the process is
complete, the FM- AS memory layer is
selected, and preset is chosen. You can switch 1
to other presets by pressing one of the preset
buttons 12 .
If you select the AM band,
layer will include 6 stations with the strongest
signal in the AM band. As soon as the process is
complete, the AM- AS memory layer is
1
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons 12 .
12
Each use of the AS function updates and
rewrites the presets in the currently selected
band (FM- AS or AM- AS).
FM- AS memory
AM- AS memory
GB
5