Mac Acl - TP-Link TL-SL5428E User Manual

340405" OCE"CEN"
MAC ACLs analyze and process packets based on a series of match conditions, which can be the
source MAC addresses, destination MAC addresses, VLAN ID, and EtherType carried in the
packets.
Choose the menu CEN→CEN"Eqphki→OCE"CEN"to load the following page.
The following entries are displayed on this screen:
Etgcvg"OCE/Twng"
"
CEN"KF<"
Twng"KF<"
Qrgtcvkqp<"
U/OCE<"
F/OCE<"
OCUM<"
XNCP"KF<"
GvjgtV{rg<"
Wugt"Rtkqtkv{<"
Vkog/Tcpig<"
340406" Uvcpfctf/KR"CEN"
Standard-IP ACLs analyze and process data packets based on a series of match conditions, which
can be the source IP addresses and destination IP addresses carried in the packets.
Figure12-6 Create MAC Rule
Select the desired MAC ACL for configuration.
Enter the rule ID.
Select the operation for the switch to process packets which match the
rules.
Rgtokv<"Forward packets.

Fgp{<"Discard Packets.

Enter the source MAC address contained in the rule.
Enter the destination MAC address contained in the rule.
Enter MAC address mask. If it is set to 1, it must strictly match the
address.
Enter the VLAN ID contained in the rule.
Enter EtherType contained in the rule.
Select the user priority contained in the rule for the tagged packets to
match.
Select the time-range for the rule to take effect.
185