The following entries are displayed on this screen:
Dcuke"Eqphki"
"
Rqtv"Ugngev<"
Ugngev<"
Oqfg<"
Uvcvg<"
Pqvg<"
You cannot establish an OAM connection between two OAM entities that work in the passive
mode.
Figure 8-4 Basic Config
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for configuration. It is multi-optional.
Select the OAM mode for the desired port.
Select Enable/Disable the Ethernet OAM function for the desired
port.
114