Maintenance; Supplied Tool Kit; Keep Gun Clean; As Needed - Graco Fusion CS20F1 Instructions - Parts Manual

Maintenance

Supplied Tool Kit

• Hex Nut Driver; 5/16
• Screwdriver; 1/8 blade
• Nozzle Drill Bit; various sizes depending on
nozzle size. See Table 1.
• Impingement Port Drill Bit; various sizes
depending on port size. See Table 3.
• 117661 Pin Vise; dual reversible chucks
Reversible
F . 35
IG
• 117792 Grease Gun; with 3 oz grease
• 15B817 Flush Manifold

Keep Gun Clean

Keep gun clean with accessory gun cover,
page 55.
Applying a light coat of lubricant will make
cleaning easier.
312666P

As Needed

1. Clean Outside of Gun, page 26.
2. Clean Mix Chamber Nozzle, page 28, a
minimum of once a day.
3. Clean Breather Plug, page 26.
4. Clean Fluid Manifold, page 27.
5. Clean Passages, page 29.
6. Clean Impingement Ports, page 29.
7. Adjust Fluid Valve Packings, page 27.

Daily

Follow Shutdown, page 16.
Reversible
TI3684a

Weekly to Monthly

1. Clean Mix Chamber and Side Seal
Assemblies, page 38. Check o-rings.
2. Clean Check Valves, page 41. Check
o-rings and filters.
Maintenance
25