Explanation Of Symbols On Unit; Date Of Manufacture - HoMedics BPW-1005 Instruction Manual And Users Manual

NOTICE
01. Do not drop this monitor or subject it to strong impact.
02. Avoid high temperature and solarization. Do not immerse the monitor in water as this will result in damage to the
monitor.
03. If this monitor is stored near freezing, allow it to acclimate to room temperature before use.
04. Do not attempt to disassemble this monitor.
05. If you do not use the monitor for a long time, please remove the batteries.
06. It is recommended the performance should be checked every 2 years or after repair. Please contact the service center.
07. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with water, diluted disinfectant
alcohol, or diluted detergent.
08. No component can be maintained by user in the monitor. The circuit diagrams, component part lists, descriptions,
calibration instructions, or other information which will assist the user's appropriately qualified technical personnel
to repair those parts of equipment which are designated repairably can be supplied.
09. The monitor can maintain the safety and performance characteristics for a minimum of 10,000 measurements or
three years, and the cuff integrity is maintained after 1,000 open–close cycles of the closure.
10. It is recommended the cuff should be disinfected 2 times every week if needed (For example, in hospital or in
clinique). Wipe the inner side (the side contacts skin) of the cuff by a soft cloth squeezed after moistened with Ethyl
alcohol (75-90%), then dry the cuff by airing.

EXPLANATION OF SYMBOLS ON UNIT

THE OPERATION GUIDE MUST BE READ
(The sign background colour: blue. The sign graphical symbol: white)
WARNING
TYPE BF APPLIED PARTS (The cuff is type BF applied part)
ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local Authority or retailer for recycling advice.
MANUFACTURER
COMPILES WITH MDD93/42/EEC REQUIREMENTS
0120

DATE OF MANUFACTURE

EUROPEAN REPRESENTATION
EC REP
SN
SERIAL NUMBER
KEEP DRY
11