that provided by a standard wall outlet, for example, 115 V for
U.S. or 230 V for Europe.
Caution
terminal to signals or use for measurements within
Measurement Categories III or IV.
NI 9375 with DSUB Isolation Voltages
Channel-to-COM or
Vsup-to-COM
Isolation
DI bank-to-DO bank
Channel-to-Channel
Channel-to-earth ground
Continuous
Withstand up to
2,000 m
Measurement Category I is for measurements performed on
circuits not directly connected to the electrical distribution system
referred to as MAINS voltage. MAINS is a hazardous live
4 | ni.com | NI 9375 Getting Started Guide
Do not connect the NI 9375 with spring
30 VDC maximum
60 VDC maximum
No isolation between channels
60 VDC,
Measurement Category I
1,000 Vrms, verified by a 5 s
dielectric withstand test