Back Panel - Monroe One-Net SE User Manual

Select Button
The Select button on the front panel is used to manually initiate a Required Weekly Test
(RWT), or to acknowledge unforwarded active alerts.
• Press the Select button once to being a manual RWT; the second line of the LCD
displays Press again for RWT. Press the Select button a second time to begin the
RWT alert. (See Chapter 7 - One Button Alert for more information.)
• When an alert has been decoded and is waiting to be forwarded, press the Select
button to acknowledge that alert. The LCD temporally shows Acknowledging.

BACK PANEL

The back panel provides all of the connections necessary for the EAS device.
1 Program Audio / Aux. Audio 4
Terminal Block
2 Radio Antenna Connectors
(Radio 1, 2, & 3)
3 General Purpose Input/Output
Terminal Block
4 BNC Video Out (optional)
5 Power Switch
6 Expansion Slot
7 AES Program Audio (optional)
8 Aux. Audio - Line Input 3 & 4
9 EAS Audio Out
One-Net/DASDEC User Manual
Back Panel
10 Main Audio - Line Input 1 & 2
11 Triple Port Gigabit Ethernet
Expansion (optional)
12 Main Network Interface
13 USB Ports
14 Second Network Interface
15 VGA
16 Serial Port (COM1)
17 PS/2 Port
18 Power Receptacle
Note
The unit provides
software support
for the Video Out,
Ethernet Expansion,
and AES Program Audio
as licensed options.
Any connections not
labeled, such as HDMI,
are not supported and
are not operational.
v3.0 | r0616 1-3