7750 SR-a4 and SR-a8 Installation Guide
Figure 22: Installing the 7750 SR-a8 Chassis in the ETSI Rack
Table 37: Rack Mounting Parts: ETSI Rack with Adapters
Key
Description
1
ETSI equipment rack rail
2
Screws used temporarily to support the bottom edge of the ETSI brackets during
chassis installation. Screws are partially installed in the rack rail in the lowest
allocated U-space on both sides of the rack unit.
3
ETSI brackets (installed on chassis, as described in
Brackets to the Chassis on page
used to attach the adapter bracket to the rack.
4
Eight screws to attach the ETSI adapter bracket to the equipment rack (screws not
included)
Required tools:
Installing the 7750 SR-a Chassis
4
3
Attaching the Adapter
80). The oval (unthreaded) mounting holes are
1
2
24657
83