Making And Answering Calls; Making A Call - Kyocera Slider Remix KX5 User Manual

2 M
AKING AND

Making a call

Make sure you are in an area where a signal can
be received. Look for the
screen. The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see
"Power Save" on your phone's screen, press any
key to return to normal operating mode.
Slide open
1.
Open the slide.
2.
Enter the phone number and press
3.
Press or close slide (if "Close to End" is
enabled. See "Ending calls using the slide" on
this page).
Slide closed
You can only use the voice dialing feature when
calling with the slide closed. Voice dialing
requires that a contact be saved with a voice tag.
See page 64.
1.
Press and hold
2.
Say the name of the contact when prompted.
The phone places the call.
3.
Press once.
User Guide for the Kyocera Slider Remix KX5 Phone
A
NSWERING
symbol on the home
.
to initiate voice dialing.
C
ALLS
Ending calls using the slide
You can set the phone to end calls immediately
when you close the slide.
Menu
• Select
Close to End
Disabled
– Select
continue when you close the slide.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up, and a dancing phone icon appears.
The phone number of the caller also appears if it
is not restricted. If the number is stored in your
Contacts directory, the contact name appears.
Slide open
• Press to answer the incoming call.
-or-
• Press
turn on the speakerphone.
Slide closed
• Press to select
Answering calls using the slide
You can set the phone to answer immediately
when you open the slide. This feature does not
apply to incoming data or fax calls.
→ →
Settings Convenience
→
Enabled.
to have the phone call
to answer the incoming call and
Answer Call
.
→
9