Table of Contents
Advertisement
2.2.5
Select the serial port from the drop down menu, then click 'Connect':
2.2.6
Once a connection is established the application is ready to use. Connection status is indicated
at the bottom left of the application window:
Help
There is a context based Help file which explains what each data entry field means and what
sort of data is expected.
2.2.7
The functions of Link2AIS are arranged in a series of tabs. Each tab contains information
relating to a particular aspect of the connected AIS transponder. Depending on the version of
Link2AIS installed not all tabs shown below may be visible.
2.2.8
Select the Monitoring tab and open the Static Data tab. This will display the 'Static Data' for the
connected AIS transponder. This includes the vessel's name, call sign, MMSI number and other
fixed information.
To configure the transponder all of the data fields must be completed and saved to the AIS.
CAUTION:
For security reasons the MMSI of the vessel cannot be changed once programmed. Do not program the MMSI
unless you are certain you have the correct information. Please check the number entered carefully. If the MMSI
programmed is incorrect the AIS transponder will need to be returned to the supplier for factory reset.
9 of 25
Y1-03-0222 Rev T4T4
Advertisement
Table of Contents
