Configuring Your Internet Connection Using The Smart Setup Wizard; Viewing And Configuring Basic Isp Settings - NETGEAR RangeMax WNR834B User Manual

If the wireless router is connected to the Internet, you can click the Knowledge Base or the
Documentation link under the Web Support menu to view support information or the
documentation for the wireless router.
If you do not click Logout, the wireless router will wait 5 minutes after there is no activity before it
automatically logs you out.
Configuring Your Internet Connection Using the Smart Setup
Wizard
You can manually configure your Internet connection using the Basic Settings menu, or you can
allow the Smart Setup Wizard to determine your Internet Service Provider (ISP) configuration.
The Smart Setup Wizard searches your Internet connection for servers and protocols to determine
your ISP configuration. This feature is not the same as the Smart Wizard configuration assistant
that only appears when the router is in its factory default state. To use the Smart Setup Wizard to
assist with configuration or to verify the Internet connection settings, follow this procedure:
1. From the top of the main menu of the browser interface, click Setup Wizard.
2. Click Next to proceed. Input your ISP settings, as needed.
3. At the end of the Setup Wizard, click Test to verify your Internet connection. If you have
trouble connecting to the Internet, see

Viewing and Configuring Basic ISP Settings

Parameters related to your Internet service are configured in the Basic Settings menu. To access
the Basic Settings menu:
1. From the main menu of the router's Web configuration interface, under the Setup heading,
click Basic Settings.
The content you see in the Basic Settings menu depends on whether your ISP requires that you log
in with a user name and password for Internet access.
Configuring Basic Connectivity
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
Chapter 8,
v1.2, January 2007
"Troubleshooting".
2-5