Makita 6905H Instructions Manual page 5

Selecting correct socket
Always use the correct
size
socket for bolts and nuts. An incorrect size socket will result
in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. Refer to
accessories section for socket size.
Installing or removing socket
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before installing
or
removing
the
socket.
To install the socket, push it onto the anvil
of the tool until i t locks into place.
To remove the socket, simply pull it off.
Switch action
To
s t a r t
the tool, simply pull the trigger.
Release the trigger to stop.
CAUTION :
Before plugging in the tool, always check to see that the trigger switch actuates properly
and returns to the "OFF" position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Press the right
side of the switch for clockwise rotation or
the left side of the switch for counterclock-
wise rotation.
CAUTION :
Always check the direction of rotation before operation.
.Use the reversing switch only after the tool comes t o a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
5