Technical Specifications For The Analog Outputs - Siemens SIMATIC SM 335 Manual

Characteristics and Technical Specifications of the SM 335
1.5.3

Technical specifications for the analog outputs

Table 1-4
Resolution (incl. overrange)
•
" 10 V
•
From 0 to 10 V
Conversion time in ms
Setting time
•
For resistive load
•
For capacitive load
•
For inductive load
Injection of substitute values
Crosstalk between outputs
Operational limit (over entire temperature
range, based on output range)
Basic error
(operational limit at 25_C, based on output range)
Temperature drift
(based on output range)
Linearity error (based on output range)
Repeatability
(in steady state at 25 _C, based on output range)
Output ripple (based on output range)
Output range (rated values)
Burden resistance
•
For voltage outputs
•
For capacitive load
•
For inductive load
Voltage output
•
Short-circuit protection
•
Short-circuit current
Connection of actuators
•
For voltage output
– 2-wire connection
– 4-wire connection (measuring circuit)
1-10
Technical specifications for the analog outputs
Analog value formation for the outputs
Noise suppression and error limits for the outputs
Actuator Selection Data
SM 335 – High-Speed Analog Input/Output Module for the SIMATIC S7-300
11 bits + sign
12 bits (+ sign)
Max. 800
t 0.1 ms
v 3.3 ms
t 0.5 ms
Yes
–40 dB
0.5%
0.2%
0.02%/K
" 0.05%
" 0.05%
" 0.05%
" 10 V
From 0 to 10 V
Min. 3 kW
Max. 1 mF
Max. 1 mH
Yes
Max. 8 mA
Possible
Not possible
6ES7 335-7HG00-8BA1