Operation; Receiving Weather Broadcasts - Radio Shack 12-240 Owner's Manual

Weatheradio with alert
Table of Contents

Advertisement

OPERATION

RECEIVING WEATHER
BROADCASTS
Follow these steps to receive National Weather Service
(NWS) broadcasts.
1. To turn on the radio, turn
clicks. The alert indicator lights. When you turn on
the radio, it is set to the alert mode.
2. Press
WEATHER
broadcasts. The alert indicator turns off.
3. Set
ANTENNA
Note: If the signal is broken or noisy, set
. Then unsnap the telescoping antenna and
ROD
extend it to its full length. If reception is still not clear,
try locating the radio near an outside wall or window.
4. Set
CHANNEL
reception.
6
VOLUME
to set the radio to receive weather
to
.
LINE
to the frequency that provides the best
to the right until it
ANTENNA
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents