EN 14
5.
3139 785 34110
5.4.
Restore the Dynamic Stroke Version
It is important to restore the Dynamic Stroke version of the set before returning the set to the customer.
Follow the steps below to restore dynamic stroke versions:
•
Close DVD tray with no disc
•
Enter the following RC sequence:
•
<3> <6> <0> <0> <0> <5> <OK> for /05
•
<3> <6> <0> <0> <3> <1> <OK> for /31
•
<3> <6> <0> <0> <5> <8> <OK> for /58
•
If the RC command is accepted successfully, the message "Stroke Version Changed to /<YY>" will be displayed on
the OSD with the dialog box titled "Region". Only the standby button would be operational after stroke version change.
Firmware Upgrading and other useful firmware hints