Washing - Panasonic NA-F135X1 Service Manual

7. WASHING

Preparation:
● Check if the washing machine is properly installed. (P.7)
● Turn on the water faucet.
After loading laundry
Turn the power on.
● The Normal program is selected when
the power is turned on.
Select a program. (P.6)
■
Timer preset
Start.
The pulsator moves without
water and measures the
amount of laundry (approx. 5
seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
● To check the water amount
Press "Water Level".
According to the water amount indication
Put in detergent.
● Approx. 20 seconds after the water
amount is displayed, water supply
begins.
Close the lid.
Operation ends with beeps.
3
Timer preset
- 10 -
2
Set how many hours later to finish
operation. (P.9)
● 2 minutes after start-up, all indications except
turn off.
● To confirm after the timer has been set, press
.
● To cancel or change, press
● The hours that can be set differ depending on
the program.
When the Fragrance program is
selected
The buzzer sounds before the final rinse and
operation is paused. Put the desired amount
of softener which has been diluted with water
directly into the tub.
● The Fragrance program cannot be selected
when Child Lock (P.12) is set.
● Operation will resume if the lid is left closed
for more than 1 hour.
■
After pressing "Start"
● You can change the water level until the end
of the wash process.
● You can change each of the "Wash", "Rinse"
and "Spin" operation contents until the end of
the wash process. Press "Pause" beforehand.
● You cannot change the program.
1
.
5 beeps