Fujitsu ASU18RLB Service Instructions Manual page 65

1-4. Setting the Remote controller custom code
(Only for wireless remote controller)
The indoor unit custom code can be changed.
Select the appropriate custom code.
Function Number
44
1-5. Setting the External input control
"Operation / Stop" mode or "Forced stop" mode can be selected.
Function Number
46
1-6. Setting the Room temperature sensor switching (Aux.)
To use the temperature sensor on the wired remote controller
only, change the setting to "Wired remote controller" (01).
This function will only work if the function setting 42 is set at "Both" (01)
Function Number Function Number
48 48
1-7. Setting the Indoor unit fan control for energy saving for cooling
Enables or disables the power saving function by controlling the indoor unit fan rotation
when the outdoor unit is stopped during cooling operation.
Function Number Function Number
4 49
00 : When the outdoor unit is stopped,the indoor unit fan operates continuously following the setting on
the remote controller.
01 : When the outdoor unit is stopped,the indoor unit fan operates intermittently at a very low speed.
(
Setting Value Setting Description
00
01
02
03
(
Setting Value Setting Description
00 Operation / Stop mode
01 (Setting prohibited)
Forced stop mode
02
( (
Setting Value Setting Value Setting Description Setting Description
00 00
01 01 Wired remote controller
( (
Setting Value Setting Value Setting Description Setting Description
00 00
01 01
03-02
Factory setting)
A
B
C
D
Factory setting)
Factory setting Factory setting
) )
Both Both
Factory setting Factory setting )
)
Disable
Enable