Table of Contents
Advertisement
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be highlighted and
the Overclock Panel will slide out to left as the following figure.
Overclock Panel contains the these features:
a. "–3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button":
provide user the ability to do real-time overclock adjustment.
Warning: Manually overclock is potentially dangerous, especially
when the overclocking percentage is over 110 %. We strongly
recommend you verify every speed you overclock by click the
Verify button. Or, you can just click Auto overclock button and let
[ WarpSpeeder™ ] automatically gets the best result for you.
b. "Recovery Dialog button": Pop up the following dialog. Let user select a
restoring way if system need to do a fail-safe reboot.
c. "Auto-overclock button": User can click this button and [ WarpSpeeder™ ]
will set the best and stable performance
[ WarpSpeeder™ ] utility will execute a series of testing until system fail.
Then system will do fail-safe reboot by using Watchdog function. After reboot,
the [ WarpSpeeder™ ] utility will restore to the hardware default setting or
load the verified best and
stable frequency according to the Recovery Dialog's setting.
d. "Verify button": User can click this button and [ WarpSpeeder™ ] will
proceed a testing for current frequency. If the testing is ok, then the
current frequency will be saved into system registry. If the testing fail,
system will do a fail-safe rebooting. After reboot, the [ WarpSpeeder™ ]
Mainboard Features
and frequency automatically.
36
Advertisement
Table of Contents
