Hamilton Beach HBF1100 Series Operation Manual page 3

30. This blender is designed with motor
overload protection. If the motor stops
during operation due to overheating,
unplug the unit and allow it to cool down
for 15 minutes. Plug unit back in after 15
minutes to resume normal operation.
31. The normal function of this product may
be disturbed by strong electromagnetic
interference. If this occurs, simply reset
the product and resume normal operation
by following the operation manual. If
normal operation cannot be resumed,
place the product in a different location.
– SAVE THESE IN STRUC TIONS –
32. Do not operate any appliance with a
damaged supply cord or plug, or after
the appliance malfunctions or has been
dropped or damaged in any manner.
Supply cord replacement and repairs
must be conducted by the manufacturer,
its service agent, or similarly qualified
persons in order to avoid a hazard. Call
the provided customer service number
for information on examination, repair, or
adjustment.
3