Cassette Deck/Vcr Features; Using The Vcr/Tape 1 And Tape 2 Monitor Buttons; Monitoring A Program Source; Dubbing A Cassette Tape - Optimus STAV-3780 Owner's Manual

Cassette Deck/VCR Features

Using the VCR/TAPE 1 and
TAPE 2 MONITOR Buttons
Monitoring a
Program Source

Dubbing a Cassette Tape

20
You can connect two cassette decks to the receiver. Selecting either
or lets you hear the playback from the cassette
TAPE 1 TAPE 2 MONITOR
deck you connected to the receiver's corresponding (
) jacks.
MONITOR
Press . VCR appears on the display. You hear the playback
VCR/TAPE 1
from the cassette deck or VCR you connected to the receiver's
jacks.
IN
Press .
TAPE 2
TAPE 2 MONITOR
program source you selected. You can hear playback or monitor a
recording from the cassette deck you connected to the receiver's
jacks. The
MONITOR TAPE 2 MONITOR REC
from the previously selected source after you press
To return to the previous source, press
disappears.
Notes:
• If you press
TAPE 2 MONITOR
ing nor recording, the receiver mutes the current audio source. To
hear the audio source, press
from the display.
• Do not press
TAPE 2 MONITOR
connected to
TAPE 2 MONITOR REC
for about 1 second.
The receiver sends the audio of the program source you select—
, , , ,
1 DVD/TV LD/SAT CD FM/AM
(audio) and
TAPE 2 MONITOR OUT/REC
or , the video program is sent to the
LD/SAT
jacks. The video program input from
video jack.
TAPE1REC
The control does not affect the level of the signal going to the
VOLUME
tape decks.
You can copy (dub) a cassette tape from one cassette deck to another
using the STAV-3780.
You can use either deck as the playback or recording deck. However, if
you want to monitor the cassette deck during dubbing, use the deck
connected to the
VCR/TAPE 1
nected to the jacks as the recording deck. Then press
TAPE 2 REC
so and the last program source you selected appear on
TAPE 2
MONITOR
the display. See "Using the VCR/TAPE 1 and TAPE 2 MONITOR But-
tons."
The control does not affect the level of the signal going to the
VOLUME
tape decks.
appears on the display along with the last
jacks continue to output sound
TAPE 2 MONITOR
when that cassette deck is neither play-
so
TAPE 2 MONITOR
while you are recording on the deck
. Doing so interrupts the recording
(tuner), or —to the
PHONO
jacks. If you select
VIDEO OUT TO MONITOR TV 1
or
DVD/TV LD/SAT
jacks as the source, and the deck you con-
VCR/
or
VCR/TAPE 1 TAPE 2
VCR/TAPE 1
TAPE 2
.
TAPE 2 MONITOR
again so
TAPE 2
disappears
TAPE 2
VCR/TAPE
VCR/TAPE 1 OUT/REC
,
VCR/TAPE 1, DVD/TV
and
2
is also sent to
VCR1/
TAPE 2