Voice Control Operation
Voice Portal Screen
a Press and release the
(Talk) button
on the top screen of any mode.
The system prompts you to say a voice
command and gives examples. Press
and release the
(Talk) button
again to bypass this prompt.
The system beeps when ready for a
command. Press the
(Hang-Up/
Back) button to cancel.
Available voice commands are
highlighted on the screen.
b Say a voice command (e.g., Address).
After that follow the voice prompt
and say a voice command.
The audio system is muted during voice
control mode.
You can use other voice commands on
the Voice Portal screen.
The system recognizes only certain
commands.
Available navigation voice commands
(P152)
Say
"Voice Help" to enter supported
commands for the current screen. A
voice help tutorial is also available.
Voice Help (P14)
During the voice control mode, press
and hold the
(Hang-Up/Back)
button to return to the Voice Portal
screen.
Set Voice Prompt to Off to bypass the
voice prompt. See your Owner's Manual.
Carefully read the usage note for the
voice control.
Voice Control System (P22)
5