Dell PowerVault TL1000 User Manual page 160

Table 31. Ultrium Tape drive sense data - Bytes 12 and 13 (continued)
Byte 12 ASC Byte 13 ASCQ
EE 32
EE 42
EE E2
EE FF
EF 01
26 11
26 12
55 08
Sense Key 6 (Unit Attention)
EE 12
EE 18
EE 19
EE 40
EE 41
EE 50
EE 51
2A 11
2A 12
Sense Key 7 (Data Protect)
EF 10
EF 11
EF 13
EF 1A
EF C0
26 10
2A 13
74 00
74 01
74 02
74 03
74 04
74 05
The descriptions below serve only as an overview of sense reporting in the tape drive. This tape drive
conforms to all sense field reporting as specified in the SCSI standards.
1. The Error Code field (Byte 0) is set to 70h to indicate a current error, that is one associated with the
most recently received command. It is set to 71h to indicate a deferred error which is not associated
with the current command.
2. The segment number (Byte 1) is zero since the Copy, Compare, and Copy and Verify commands are
not supported.
142
Dell PowerVault TL1000 Tape Autoloader: User's Guide
Description
Encryption - Keystore Related Problem
Encryption - EKM Challenge Pending
Encryption - Key Translation Disallowed
Encryption - Security Prohibited Function
Encryption - Key Service Not Configured
Encryption - Incomplete Key - Associate Data Set
Encryption (T10) - Vendor Specific Reference Key Not Found
Encryption (T10) - Maximum Number of Supplemental Keys Exceeded
Encryption - Key Change Detected
Encryption - Changed (Read)
Encryption - Changed (Write)
Encryption - EKM Identifier Changed
Encryption - EKM Challenge Changed
Encryption - Initiator Identifier Changed
Encryption - Initiator Response Changed
Encryption - Data Encryption Parameters Changed by Another I_T Nexus
Encryption - Data Encryption Parameters Changed by Vendor Specific Event
Encryption - Key Required
Encryption - Key Generation
Encryption - Key Translate
Encryption - Key Optional
Encryption - No Operation
Encryption - Data Decryption Key Fail Limit
Encryption - Data Encryption Key Instance Counter Changed
Security Error
Encryption - Unable to Decrypt Data
Encryption - Unencrypted Data Encountered While Decrypting
Encryption - Incorrect Data Encryption Key
Encryption - Cryptographic Integrity Validation Failed
Encryption - Error Decrypting Data