Lcd Display - D-Link DWR-933 User Manual

Charging Complete
Section 1 - Product Overview
Charging Complete
Charging Complete
WPS Aborted
WPS Aborted
WPS Aborted
WPS Aborted
When you turn on the DWR-933, the D-Link logo will appear while the device is booting, then the home screen will appear. After a few seconds of
WPS Pairing
inactivity the screen will power off. To wake up the display, press the Power Button ( ) or Display/WPS Button
WPS Pairing
WPS Pairing
WPS Pairing
MYOPERATOR
Press the Display/WPS Button
MYOPERATOR
MYOPERATOR
MYOPERATOR
SSID1:mySSID
KEY1:aaaabbcc
SSID1:mySSID
SSID1:mySSID
SSID1:mySSID
KEY1:aaaabbcc
KEY1:aaaabbcc
KEY1:aaaabbcc
SSID2:mySSID
KEY2:bbbbccdd
SSID2:mySSID
SSID2:mySSID
SSID2:mySSID
KEY2:bbbbccdd
KEY2:bbbbccdd
KEY2:bbbbccdd
Web IP:192.168.0.1
Usage: 105KB
Web IP:192.168.0.1
Web IP:192.168.0.1
Web IP:192.168.0.1
Usage: 105KB
Usage: 105KB
Usage: 105KB
D-Link DWR-933 User Manual
Hardware Overview

LCD Display

Signal/ # Connected Clients
Network
to cycle through the Wireless Network 1, Wireless Network 2, and Web Gui information screens.
Wireless Network SSID 1:
Key:
Wireless Network SSID 2:
Key:
Web IP:
Usage:
# Connected Clients
2.4 GHz 5 GHz
Mobile Network Provider
Wireless Network 1
By default, the network name (SSID) of the DWR-933 will be
in the format dlink_DWR-933_xxxx, where "xxxx" represents
the last four characters of the DWR-933's MAC address.
The password required to join the above network.
Wireless Network 2
By default, the network name (SSID) of the DWR-933 will be
in the format dlink_DWR-933_xxxx, where "xxxx" represents
the last four characters of the DWR-933's MAC address.
The password required to join the above network.
Web GUI
Your device's wireless configuration utility IP address.
Your device's mobile data usage count.
.
SIM Card Status/
Battery
Status
SMS
5