Instructions - Napoleon Prestige PRO 500 Instruction Manual

Instructions

Note: Certain steps indicate the use of
landscape glue. This is for added stability
but it's optional and at the discretion of the
user.
Step 1
Lay down the stone pattern shown along
with the tank and drawer frame. Glue the
cut ends of the blocks to the tank and
drawer frame for this and future layers.
Check that stones are level at every step.
There should be 20 inches between the
stone and top of the frame. Use included
shims for adjustments.
Use (7) 12 x 8 x 4 blocks
Use (1) 8 x 8 x 4 blocks
Use (2) 4 x 8 x 4 blocks
Use (2) 4 x 8 x 6.125 blocks
Use (1) Tank and Drawer Frame
Step 2
Lay out the second layer as shown along
with the Vent Box. Check that stones are
level. There should be 16 inches between
the stone and top of the frame. Use
included shims for adjustments. Glue this
layer down to the first layer. Glue the cut
ends of the blocks to the tank and drawer
frame.
Use (8) 12 x 8 x 4 blocks
Use (1) 4 x 8 x 4 blocks
Use (2) 4 x 8 x 2.125 blocks
Use (1) Stainless Steel Vent Box
3
8 x 12
4 x 8 x 6.125
8 x 12
4 x 8 x 2.125
8 x 8
4 x 8
4 x 8
02-2018