Telephones; Attendant Position Options - Toshiba Strata DK14 Installation And Maintenance Manual

DK424 Configuration

Telephones

Telephones
The DK424 system supports Toshiba Proprietary Digital (DKT) and older series Electronic
Telephones (EKTs). Standard telephones (500 or 2500 series) and devices that require a standard
telephone line interface (fax, modem, VM, etc.) can also be connected to DK424.
Toshiba provides the following 2000-series Digital Telephones for Strata DK424 systems.
DKT-2020SD–20-button speakerphone with LCD
DKT-2010SD–10-button speakerphone with LCD
DKT-2020S–20-button speakerphone
DKT-2010H–10-button handsfree answerback telephone
Toshiba telephones can be equipped with optional subassemblies (listed on

Attendant Position Options

The DK424 provides three options for attendant positions which answer system incoming calls.
See Table 4-8
considerations.
PC Attendant Console–used for medium-to-heavy traffic systems where an attendant must
answer and transfer incoming calls. The PC Attendant Console requires a customer-provided
PC plus the RATU PCB.
Up to two consoles can be connected on systems with RCTUB or RCTUBA/BB or four with
RCTUC/D (Release 2 and 3) and RCTUE/F PCBs. The RATU PCB uses four station ports in
system software. RCTUC/D Release 1 and all RCTUAs do not support the attendant console.
Direct Station Select (DSS) Console–used for medium traffic systems where an attendant
must answer and transfer incoming calls. The DSS console must connect to circuit 8 on a
PDKU PCB.
Digital Add-On-Module (DADM)–used for medium traffic, smaller systems, where an
Attendant must answer and transfer incoming calls. The ADM connects to any 2000-series
digital telephone. The DADM shares the associated telephones circuit so it does not require a
designated PCB or circuit port (see
4-16
for the number of options per RCTU processor. See
"DADM" on Page 4-33.)
Page 4-33).
Table 4-20 for configuration
Strata DK I&M 5/99