Chapter 3 - Output; Good Read Indicators; Beeper - Good Read; Beeper Pitch - Good Read - Honeywell 3200 User Manual

3
Output

Good Read Indicators

Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning
this option off, only turns off the beeper response to a good read indication. All
error and menu beeps are still audible. Default = On.
* On
Off
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the imager
emits on a good read. Default = Medium.
Low (1600 Hz)
* Medium (2550 Hz)
High (4200 Hz)

Trigger Modes

Manual/Serial Trigger

Trigger

The following barcodes will allow you to use the reader in Manual Trigger mode
(need to press the trigger to read) or Automatic Trigger mode (the beam is
always on).
* Manual/Serial Trigger
3200 User's Guide 3 - 1