Connecting Power - Radio Shack XKKa Owner's Manual

CONNECTING POWER

Caution:
• Use only the supplied power cord. If your power cord is lost
or damaged, you can order a replacement cord from your
local RadioShack store.
• Before plugging the power cord's cigarette-lighter plug into
your vehicle's cigarette-lighter socket, make sure the plug's
tip is screwed firmly onto the plug. See "Replacing the
Fuse" on Page 23 for more information about the cigarette-
lighter plug.
• Unplug the power cord's cigarette-lighter plug from your
vehicle's cigarette-lighter socket when you turn off the igni-
tion. This prevents your vehicle's battery from being drained
if you leave the detector on when you turn off the ignition.
Plug the supplied power cord's barrel plug into the detector's
power jack. Then plug the cord's cigarette-lighter plug into your
vehicle's cigarette-lighter socket.
Note: If the detector does not operate when you turn it on,
remove the cigarette-lighter plug from your vehicle's socket
and check the socket for ashes and other debris. Also check
the fuse in the cigarette-lighter plug and your vehicle's fuse
block (see "Replacing the Fuse" on Page 23).
11