Operation In The First-Level Of The Service Menu - JVC GY-DV5000U Service Manual

1.9.2 Operation in the first-level of the service menu

(1) While holding down the specified button(s) (FAS, LOLUX),
press and hole the MENU button for more than 1 second.
(2) The first-level of the service menu is displayed.
(3) Rotate the SHUTTER dial to move the cursor ( 3) on to the
item to be modified.
(4) Push into the SHUTTER dial to direct the item on which the
cursor ( 3) is located.
• Pressing the MENU button returns to the status display.
• Can not open the service MENU while recording.
– – – M E N U – – –
C A M E R A 1
V T R M E N U
E X I T
< >
V E R S I O N
S Y S C P U
C A M C P U
V T R C P U
F P G A 1
F P G A 2
Fig. 1-9-1 (1)
While holding down the FAS button, press and hold STATUS
button for more than 1 second, this MENU screen is showed
on the monitor.
– – – M E N U – – –
C A M E R A 1
C A M E R A 2
V T R 1 M E N U
V T R 2 M E N U
D I P S W
H O U R M E N U
E R R O R H I S T O R Y
O T H E R S
E X I T
Fig. 1-9-1 (2)
At first, while holding down the DISPLAY button, turn ON
the power switch, and then, While holding down the FAS
button, press and hold STATUS button for more than 1 sec-
ond, this MENU screen is showed on the monitor.
– – – M E N U – – –
C A M E R A 1 M E N U
C A M E R A 2 M E N U
C A M E R A 3 M E N U
V T R 1 M E N U
V T R 2 M E N U
V T R 3 M E N U
D I P S W
H O U R M E T E R
E R R O R H I S T O R Y
O T H E R S
E X I T
Fig. 1-9-1 (3)
At first, while holding down the DISPLAY button, turn ON
the power switch, and then, While holding down the FAS
and LOLUX button, press and hold STATUS button for more
than 1 second, this MENU screen is showed on the moni-
tor.
1-8
M E N U
: 0 0 – 0 0
: 0 0 – 0 0
: 0 0 – 0 0
: 0 0 – 0 0
: 0 0 – 0 0
M E N U
M E N U
1.9.3 CAMERA 1 menu
(1) In a service menu, place the cursor ( 3) on "CAMERA 1"
and push the SHUTTER dial to display the CAMERA1 menu.
– – – C A M E R A 1
L C D L / R R E V E R S E O F F
F A S A U D I O
A L C L I M I T
E R R O R D E T E C T C A N C E L
P A G E B A C K
Fig. 1-9-2
(2) Rotate the SHUTTER dial to move the cursor ( 3) on the
mode to be adjusted.
(3) Push the SHUTTER dial so that the parameter blinks.
(4) Rotate the SHUTTER dial to vary the parameter.
(5) After completing the parameter setting, push the SHUTTER
dial to stop the blinking of the parameter and store the set-
ting in memory.
(6) After completing the setting, move the cursor ( 3) to "PAGE
BACK" and push the SHUTTER dial to return to the display
at the higher hierarchy level.
Item
LCD L/R OFF
REVERSE
ON
AUTO
FAS
AUDIO
SW SET
ALC LIMIT 9dB
12dB
15dB
18dB
CANCEL Standerd setting
ERROR
DETECT
EXECUTE Push the SHUTTER dial when
CANCEL
Table 1-9-2
– – –
A U T O
9 d B
Parameter
When the face of LCD screen is
turned toward the camera subject,
does not invert the left and right of
the LCD display. (normal image)
When the face of LCD screen is
turned toward the camera subject,
inverts the left and right of the LCD
display. (mirror image)
When selected FAS mode, audio
recording Level will be
automatically set to AUTO mode.
When selected FAS mode, audio
recording level will be work
depending on switch setting.
Maximum ALC value set to 9dB.
Maximum ALC value set to 12dB.
Maximum ALC value set to 15dB.
Maximum ALC value set to 18dB.
indicate this message to start the
CCD Blemish detect function.
( indicates the factory setting.)