Samsung MAX-DN55 Service Manual page 19

3-3 Cabinet-Rear and Main PCB
1. Remove 19 screws of $.
2. Lift the Cabinet-Rear in the direction of arrow D and slide it to the rear
by releasing the hook of Cabinet-Bottom.
3. Remove 1 screws of % and slide the Main PCB to the rear to remove.
3-4 Cabinet-Front and Cabinet-Bottom
1. Remove 2 screws of ^.
2.
Slide it to the front by releasing two hooks in the direction of arrow E,F on the bottom of Cabinet-Front to remove.
3. Remove 1 screws of & and slide the PRO-LOGIC PCB to the top to remove .
Samsung Electronics
Figure 3-3
Figure 3-4
Diassembly and Reassembly
3-3