Accessories; How To Use The Everio Dock; Attaching The Core Filter To The Usb Cable And Dc Cord - JVC GZ-MG730 Instructions Manual

Accessories

Shoulder Strap
(p. 15)
Everio Dock
CU-VC6E (see below)
Core Filter (x 2)
(see below)
NOTE
Make sure to use the provided cables for connections. Do not use any other cables.

How to Use the Everio Dock

You can connect cables to the connectors of the Everio dock. The connection is completed when you place the
camera on the dock.
Camera Connection Terminal
NOTE
For the connection using the S-Video jack and DV jack, an optional S-Video cable and DV cable are needed.
Consult the JVC Service Centre described on the sheet included in the package for details on its availability.
Make sure to connect the end with a core filter to the camera. The core filter reduces interference.
• The S-Video cable (optional) enables even higher playback quality on TV. (p. 19)
• When dubbing files from the camera with a VCR/DVD recorder, using the DV cable enables even higher
dubbing quality.

Attaching the Core Filter to the USB Cable and DC cord

Attach the core filter to the USB cable. Also, attach the core filter to the DC cord. The core filter reduces
interference. Connect the end of the cable with the core filter to the camera.
Release the stopper.
Battery Pack
BN-VF�0�U
CD-ROM
(p. 24)
or
AC Adapter
AP-V14E/19E
S-Video Jack
AV Jack
3 cm
USB cable: Wind once.
DC cord: Wind twice.
Audio/Video Cable
Remote Control Unit
RM-V751U (p. 15)
DC Jack
USB Cable
(p. 22, 25 and 30)
Lithium Battery
CR2025
Pre-installed in the
remote control unit.
Power Cord
(for AP-V14E only)
DV Jack
USB Jack