Ericsson A1228D User Manual page 11

Align the small plug on the charger cord with the con-
#Ã
nector on the bottom of your phone. The connector
on the phone is above the lightning bolt symbol.
Press the plug into the connector until the plug
$Ã
"snaps" into place. The battery icon is alternated with
the
Note! Do not twist while inserting or removing the small plug
on the charger cord!
Continue charging the phone until the battery is fully
%Ã
charged.
To disconnect the charger, lift the plug
&Ã
connected to the phone upwards and
pull it out.
Charge-Only Mode
If your phone is off, attaching the
charger will cause the phone to activate
in charge-only mode. When this mode
is activated the message Charging Only... appears
in the display. Your phone is now fast (rapid) charging
the battery. When your phone is fully charged, Charg-
ing Complete appears in the display.
Getting Started
icon.
Note! You cannot make or receive calls when your phone is in
charge-only mode.
Slow (Trickle) Charging a Deeply
Discharged Battery
The battery may become deeply discharged (for exam-
ple, when the battery is stored for a long period). As a
result, the phone may not activate charge-only mode
when the charger is connected.
Attach the charger to the phone for several hours to
Ã
slowly charge (trickle charge) the battery.
After trickle charging the battery for several hours the
!Ã
phone should activate the charge-only mode automat-
ically.
Continue charging the phone until the battery is fully
"Ã
charged.
Note! If the phone is powered On, the battery icon is alter-
nated with the icon.
Note! If the phone is in charge-only mode, Charging Com-
plete appears in the display when the battery is fully
charged.
9