Advertisement
1
4
TO SET THE DATE
TO SET THE DATE
This watch is so designed that the date changes one
day by turning the hour hand two full circles at the
maximum in the way as "time difference adjustment".
By turning the hour hand two full circles clockwise at
the maximum, the date advances one day, and by
turning it two full circles counterclockwise at the maxi-
mum, the date is put back one day.
01
Unscrew the crown by turning it coun-
terclockwise.
02
Pull out the crown to the first click.
03
T u r n t h e c r o w n t o s e t t h e d a t e . B y
clockwise
The hour hand turns
turning the hour hand two full circles
c l o c k w i s e , a n d t h e
clockwise or counterclockwise at the
date advances.
maximum, one day is advanced or
put back, respectively.
When setting the hour hand, other hands
may move slightly. However, this is not mal-
function.
04
After setting the date, reset hour hand
to the current hour, and then, push
the crown back and turn it clockwise
until it locks in place.
counterclockwis
Check that AM/PM is correctly set by turning
The hour hand turns
the hour hand past the 12 o'clock marker. If
c o u n t e r c l o c k w i s e ,
and the date is put
the date changes to the next, the time is set for
back.
the AM period. If the date does not change,
the time is set for the PM period.
If you set the date between 10 PM and 0
AM by turning the hour hand counterclockwise,
t u r n t h e h o u r h a n d u n t i l i t s h o w s s o m e t i m e
between 9 PM and 10 PM once, then set the
date. In case the hour hand is turned counter-
clockwise, the date will be put back when the
hour hand shows around 10 PM, however, it is
not malfunction
Date adjustment at the end of the month
It is necessary to adjust the date at the end of February and 30-day month.
Example To adjust the date in the AM period on the first day of
a month following a 30-day month.
The watch displays "31" instead of "1". Unscrew the crown by turning it
counterclockwise and pull it out to the first click.
Turn the crown clockwise to set the date to "1". After that, push back the
crown and screw it completely by turning it clockwise.
59
Advertisement
