Explanation Of Lights - DeLonghi ECAM35X.15 Series Instructions For Use Manual

Bean to cup espresso and cappuccino machine
Table of Contents

Advertisement

24. EXPLANATION OF LIGHTS

LIGHTS DISPLAYED
FLASHING
ON STEADILY
FLASHING
ON
ON STEADILY
FLASHING
ON STEADILY
FLASHING
FLASHING
POSSIBLE CAUSE
Insufficient water in the tank (A17)
The tank (A17) is missing or not correctly
in place
The grounds container (A11) is full
After cleaning, the grounds container
(A11) has not been replaced
The coffee beans have run out
The pre-ground coffee funnel (A4) is
clogged
The pre-ground coffee function has been
selected without placing any pre-ground
coffee in the funnel (A4)
The pre-ground coffee funnel (A4) is
clogged
The machine must be descaled
19
REMEDY
Fill the tank with water and/or insert it correctly,
pushing it as far as it will go until it clicks into
place.
Insert the tank correctly, pushing it as far as it
will go until it clicks into place.
Empty the grounds container and drip tray (A15),
clean and replace (fig. 16). Important: when re-
moving the drip tray, the grounds container must
be emptied, even if it contains few grounds. If this
is not done, when you make the next coffees, the
grounds container may fill up more than expected
and clog the machine.
Remove the drip tray (A15) and insert the
grounds container.
Fill the beans container (A3 - fig. 9).
Empty the funnel with the help of a brush as de-
scribed in section "18.8 Cleaning the pre-ground
coffee funnel".
Place pre-ground coffee in the funnel (fig. 12) or
deselect the "pre-ground" function.
Empty the funnel with the help of a brush as de-
scribed in section "18.8 Cleaning the pre-ground
coffee funnel".
The descaling procedure described in section
"19. Descaling" needs to be performed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents